How To Correctly Cut And Install PVC Hollow Boards?

In building decoration and industrial applications, PVC Hollow Boards are increasingly favored by the market due to their lightness, waterproofness, and corrosion resistance. Whether it is used for wall decoration, ceiling engineering, advertising display, or packaging partitions, mastering the correct cutting and installation methods can not only improve construction efficiency, but also extend the service life of the product. This article is explained in detail by Zhizheng, a professional PVC Hollow Boards supplier.

Choose the right cutting tool

Before cutting PVC Hollow Boards, it is crucial to choose the right tool:

For small projects, you can use a utility knife, hand saw, or multi-purpose tool;

For large-scale cutting, it is recommended to use professional tools such as electric circular saws, jigsaws, or table saws.

Tips: Using a fine-toothed saw blade can reduce burrs and ensure a smooth cut surface.

Precautions when cutting

When cutting PVC Hollow Boards, please pay attention to the following points:

Fix the board: Use a clamp or anti-slip pad to prevent the board from sliding during cutting;

Cut along the direction of the reinforcement: easier to operate and less likely to break;

Slowly and evenly push: avoid hot melting and burning edges.

As a professional PVC Hollow Boards wholesale platform, Zhizheng recommends wearing goggles and gloves during operation to ensure construction safety.

Preparation before installation

Although PVC Hollow Boards are easy to install, the preliminary preparation cannot be ignored:

Measurement and planning: confirm the installation size and design the layout plan in advance;

Clean the surface: ensure that the pasting/fixing surface is clean and dry;

Choose a suitable fixing method: such as adhesives, screws, snap-on systems, etc.

If you are looking for a reliable PVC Hollow Boards supplier, Zhizheng can provide you with technical guidance and installation matching suggestions.

Installation method analysis

Gluing method

Suitable for indoor decorative panel installation:

Use special PVC glue or all-purpose glue;

Apply the glue evenly and press to fit;

Stand for more than 12 hours to ensure firmness.

Snap-on installation method

Suitable for ceiling and wall modular structures:

Install the keel structure;

PVC Hollow Boards can be spliced by inserting the card slot;

The overall appearance is beautiful and easy to disassemble and replace.

Screw fixing method

Applicable to scenes with large structural load-bearing, such as warehouse partitions or outdoor structures:

Pre-drill holes to prevent cracking;

Use stainless steel screws to fix;

Can be matched with decorative caps to beautify the appearance.

Common problems and solutions

Rough edges after cutting: Use a fine-toothed saw blade and grind.

Bulging of the board after installation: Check whether the surface is uneven or the glue is not evenly applied.

Unstable installation: It is recommended to add keel support or use stronger glue.

Standards for choosing high-quality PVC Hollow Boards

As a PVC Hollow Boards supplier with many years of experience, Zhizheng reminds you:

The board should be uniform in color and free of bubbles;

It has a certain toughness and strength, and is not easy to break;

It has flame retardant, waterproof, insect-proof and other properties.

Conclusion: Choose Zhizheng for wholesale, and you will be more assured of quality

The correct cutting and installation methods can maximize the performance of PVC Hollow Boards. If you need PVC Hollow Boards wholesale, or encounter any technical difficulties during installation, please feel free to contact us.

Contact email: zhizhengchina@163.com

Official website: https://www.vinylprofile.com

Zhizheng – Your trusted PVC Hollow Boards supplier!